Electric Warp Beam Lift Trolley with Harness Mounting Device

ST-MBT-02I

Electric Warp Beam Lift Trolley

( With Harness Mounting Device& Heald Frame Mounting! )

Efficiency Increased by 50%!
Free Maintenance GEL Battery!
Small Size Run in Limited Space!
5 Times Less Labor Than Normal Turning!
Safe Handling Lift&Transport, CE Certificate!


SUNTECH STelego Warp Beam Lift Trolley, Beats the Old Ones!


QUALITY MEETS WITH EUROPEAN CE STANDARD, CERTIFICATE AVAILABLE!

ST-MBT-02I is the newest model of SUNTECH Electric Warp Beam Lift Trolley, which is suitable for bottom beam transporting, inserting in weaving machines, weaving beam weighing up to 1800kg and beam width as per requirement, additional loading capacity of 300kg for harness.

The trolley is applicable for any weaving machines with their normal working width 170-340cm without changing its size.

The harness is accommodated by the standard take-up for harness frame and the contact rails and dividing rails or the complete warp stop motion.


This Fully Electric Warp Beam Lift Trolley also has the following characteristics:

AC MOTOR

1.Low Noise

2.Free Maintenance

3.Friendly Environment

Lithium BATTERY

(1) Longer life, the life of lithium batteries found on the Internet is 3 times that of gel batteries
(2) Smaller volume with the same capacity
(3) There is no self-discharge phenomenon. When the car is not in use, it is not like a gel battery that must be charged once a month to prevent power loss.


ELECTRIC POWER STEERING

EPS Steering, Flexible and Effortless, even in a Limited Space

Compact Structure, Heavy Capacity

Side Shift, Work Smoothly & Steadily Under Load

REMOTE CONTROL

You Can Use Remote Control the Harness Mounting Device Going up & Down, Streching Out and Retracting.

WARRANTY EXTENSION IS AVAILABLE AT SUNTECH THAN OTHER SUPPLIERS!

FAQ about Electric Warp Beam Lfit Trolley:

If loom width is same, but the brand is different, whether it can use same warp beam lift trolley?

Yes, you can use same warp beam lift trolley as long as determine the distance between the out wall of the loom, then we will design the warp beam lift trolley based on the largest size.

What’s the battery charging time ?
Battery charging time is generally 8 hours, and we suggest equalizing charge once a month.

For a new machine, it must be charged 12 hours for first three times. The using life of the battery will be harmed if not operated by principle.




warp beam lift trolley
Contact Us Now to Get Your Custom Solution!
Call Our Expert Sales Directly 0086-571-86597552

Related Products