In the modern textile industry, more and more attention is paid to the uniformity and high efficiency of fabric cutting. When the fabric is placed on the cutting machine, automatic, easy, neat and fast cutting becomes especially crucial. Such a machine is what everyone hopes to have, and SUNTECH's fabric cutting machine can do this.
Regarding the fabric cutting machine, SUNTECH has various model, such as ST-USCM( ultrasonic cutting machine--fabric selvedge or strip cutting), ST-ASCM(computerized fabric cutting machine), ST-MSCM(fabric sample) and ST-HSCM(fabric sample cutter).
ST-USCM is used for a wide range of fabrics, especially polyster; viscose etc. This machine can be used to cut selvedge or cut stripes. ST-USCM has 3 kinds of cutters, laser cutter, heat cutter and ultrasonic cutter. All of them can achieve the effect of edge sealing, but ultrasonic will be more suitable for cutting small rolls of fabric, because its cutting effect is better, cutting and sealing is smoother. But heater cutting and laser are more suitable for continuous cutting and cutting large rolls of fabric, because heater cutting needs to be heated before cutting, and there will be a little smoke and smell when cutting.
ST-MSCM is fabric sample cutter which precise and accurate with milimeter guider. And it is safe which is two-hand operated. ST-MSCM is mobile, it can be moved anywhere, which is very convenient for the operator. Movable does not require workers to move a large number of fabrics to the location of the machine, but only needs to move the machine to the place where the fabric is or to an open place to start cutting the fabric. This is very convenient for factories. What’s more, it is reliable and maintenance-free.
ST-HSCM is efficient sample cutting, it is more suitable for small number of samples, it also has safety protection device, it is an economical model.
Compared with ST-USCM, ST-MSCM and ST-HSCM, the biggest feature of ST-ASCM is that it is controlled by PLC. ST-ASCM is used to cut textile swatches for mass production. It is suitable for all type fabrics as well as for leather, artificial leather, felt, carpet, etc.
About the details of ST-ASCM, I would like to make a brief introduction here
1. PLC controlled and touching screen operation. The cutting length, width, speed and other elements can be set on the touch screen, and the machine will automatically cut according to the requirements. This automated operation will greatly improve efficiency and operators can adjust factors such as length, width and speed according to their needs.
2. Japanese Imported Alloy Steel Blade. The blades used in the machine are made form Japanese imported alloy steel with hardnedd HRC63-65. If you take good care of the blade,the blade can cut 200,000 times,this is very different from an overly long blade. After all, for a cutting machine, the service life of the blade is very important, which is directly related to the efficiency of cutting fabrics and the cost of subsequent use.
3. 4pcs of hand protection safety light curtains. When any goods or hands block the senor, the machine will stop automatically.This can avoid accidental injury by the machine or when there is an unknown object on the machine that causes the blade to be damaged
4. High-Tech red laser. High-Tech red laser as guiding line for precise cutting location.
5. Motor controlled belt and cutting board. Motor controlled belt for cutting board moving and the cutting board 90 degree turning.