When weaving factories and knitting factories weave the fabrics, and then go through a series of dyeing and finishing stages, the fabrics produced in large quantities need to be sold through fabric distributors when these fabrics need to be sold. At the same time, it is necessary to cut the fabric to better sell it. SUNTECH have a series of Fabric cutting machine to help all stages of the textile industry to cut fabrics.
Different kinds type of Fabric Cutting Machines meet different customer needs, fabric sample cutting machine are very popular among fabric distributors. SUNTECH have different model fabric sample cutting machine to choose, Hand type, Motorized type and Automatic type. And for different customer requirement SUNTECH can provide different model. And all of these types fabric sample cutting machine use Japanese imported alloy cutting blade,which is three times durable than normal cutting blade, a new cutting blade can cut 50000 times then you need polish it, you can polish one cutter for 3 times. That is to say one blade can cut 50000x4=200000 times in total, it's a pretty long lifespan. And SUNTECH have the same technology with Switzerland Polytex which is the most famous Cutting Solution manufacturer but this cloth cutting machine price is at least 3-4 times than us. And for these three different types of machines can meet the cutting needs of different fabric samples. For those with less demand for fabric sample cutting could choose hand type or motorized type, for those with more demand for fabric sample cutting could choose automatic type which is use PLC control.Because the blade of the machine is relatively sharp when cutting, in order to prevent injury to the operator when the machine is running, the machine is equipped with safety protection device.
.png)
AUTOMATIC FABRIC SAMPLE CUTTING MACHINE
In addition to fabric sample cutting machine for fabric distributors, SUNTECH also has a range of fabric cutting machines for weaving mills, such as heat cutting machine, ultrasonic cutting machine, fabric inspection&slitting machine and so on.
SUNTEC has more than 50 years of experience in the textile machinery industry, and has rich experience in what kind of cutter to use for different fabrics
1) Cold cutting: Suitable for leather, foam and coated fabrics(The fabric should be no burrs after cutting).
2) Heat cutting: Suitable for fabric that there are burrs after cutting. (The fabric edge is a little hard after heat cutting)
3) Ultrasonic cutting: Suitable for fabric that there are burrs after cutting. (The effect of side sealing is better than heat cutting)
4) Laser cutting: Suitable for a wide range of fabrics, especially for elastomeric fabrics.
And there also have some differences between heat cutting and ultrasonic cutting:
A.Ultrasonic cutting has better cutting effect, the cutting and sealing effect is
B.For heat cutting, the cutting blade could do electrical heating before cutting fabric edge, but there will be a little smoke and smell during cutting.
And there are two kinds of cutting in ultrasonic cutting: one type is cutting block, another is cutting head.The using time of block type ultrasonic head will be longer. If it is damaged, just need to change the circular head on the top side and the cost is low.The cutting blade is Chinese brand and using time of the cutting blade depends on customer’s using frequency.