When the consumer experiences a vacuum or burr on the selvedge of the dyed and finished fabric, it is often essential to cut the selvedge during winding at the plant that does the dying and finishing. Or, when manufacturing certain finished items that only need narrow-width textiles, consumers often need to trim wide-width fabrics into narrow-width fabrics. This is because some end products only require narrow-width fabrics. At this point in time, the demands of our clients may be properly met by the fabric strip cutting machine that we have, and it can also give efficient manufacturing. The ST-USCM cloth strip cutting machine by SUNTECH comes highly recommended from our team.
I.Function
1. The purpose of the selvedge cutter
We have the option of installing a cutting device on either end of the machine. This will allow us to trim the edge of the cloth as it is being wound around the spool.
2.A capability for cutting strips
If the client requires a certain number of trims, we are able to install a cutting mechanism in the midst of the machine and cut the strips while the machine is winding the fabric according to their specifications.
II.A Form of Cutting
1.Ultrasonic cutter
In order to fulfill its aim of cutting through the material, the ultrasonic cutting machine makes use of the energy of the ultrasonic wave to first heat and then melt the portion of the material that is to be cut. Cutting using ultrasonic waves does not need a blade that is particularly sharp, does not call for a significant amount of pressure, and does not chip or otherwise harm the substance being cut.
The component that does the cutting also has an effect that is similar to fusion. The region that will be cut has flawlessly finished edges, which will prevent the material from being loosened when it is being cut (eg, flashing of textile materials). The applications of an ultrasonic cutting machine may also be expanded, including but not limited to the following: digging holes, digging with a shovel, scraping paint, carving, slitting, etc. Since the cutting blade is vibrating at an ultrasonic frequency, there is very little resistance to the blade's movement due to friction, and the material that is being cut does not easily adhere to the blade. It has a very noticeable slicing effect on materials that are frozen, viscous, and elastic. It is very useful for cutting through tough materials like food or rubber, as well as for relieving uncomfortable pressure.
When loading the ultrasonic vibration onto the cutting bottom mold, we employ a cutting technique that is similar to cutting on a cutting board. This bottom mold is similar to the cutting board that is used in real life. This similarity is what causes the cutting board to create ultrasonic vibration, which may also have the impact of cutting. To effect any adjustments, you need to utilize standard cutter.
2.Heat cutter
Before cutting the cloth edge, the cutting blade could have been able to perform electrical heating.
3. Dry chopper
The term "dry cutter" refers to a method of cutting that makes use of technical means or methods that do not generate high temperature during the cutting process. As a result, the material that is being cut is able to retain its original material characteristics, and the temperature during the cutting process does not fluctuate significantly; in most cases, the temperature rise does not go above 40 degrees Celsius. The impact is comparable to that of cutting with scissors, and some textiles may have burrs after being cut.
4.Laser cutter
In the world of material processing, one of the most cutting-edge and popular methods is known as laser cutting. It is a technique of processing that involves the use of a high-energy-density laser beam as a "cutting tool" in order to perform thermal cutting on various materials. The use of a laser for cutting offers a number of benefits, including the ability to seal edges, complete absence of pollution, and relatively high cost.
III.Machine advantage
1. Have at least four different types of cutters so that you may use them on the many different types of cloth.
2.A pneumatic roller for centering and a guide for the cloth ensure that the fabric is positioned in the middle of the machine and try to prevent any instances of fabric shifting.
3.Correction of the deviation roller is used to ensure that the edge of the cloth is aligned prior to perfect cutting.
4. Components from well-known brands ensure a smooth and reliable operation.
SUNTECH is an established global company that has conducted research and worked in the industry for many years. We are dedicated to giving our consumers access to high-quality goods as well as individualized service options. Customers will get the ultimate and all-encompassing service experience as a result of our experienced specialists providing them with quick and effective integrated services in pre-sales consulting, sales, maintenance, and complete after-sales support. Please do not hesitate to get in touch with us if you are interested in the fabric strip cutting machine or the cloth cutting machine. We will tailor our response to meet all of your requirements and deliver a comprehensive answer. There is also non woven fabric slitting machine. Any interest, come to click the link.