A machine that cuts fabric is referred to as a cloth cutting machine. This kind of equipment is often put to use for the purpose of cutting huge amounts of tiny samples. The respective textile industry, such as garment manufacturers, fabric dealers, and so on, makes extensive use of fabric cutting machines in their day-to-day operations. A fabric cutting machine has several applications, including the slicing of leather, cotton textiles, hard paper, and other materials related to fabrics and leather.
Now, let's have a look at the operating method of the fabric cutting machine:
1. Raise the cloth pressing roller, turn on the switch for the air pump, and then turn on the source of the air. Next, pull up on the manual air pressure switch that is located on the left side of the console.
2. Position the finished compounded blanket so that it is underneath the cloth pressing roller. Then, press the manual air pressure switch that is located on the left side of the operating table. This will cause the cloth pressing roller to drop down and apply pressure to the blanket. During the operation, make sure that your hands are placed on the outside of the fabric so that you do not accidentally crush any of your fingers.
3. Move the motor/manual switch on the console so that it is in the manual position, turn on the power supply, adjust the inverter knob on the left side of the console so that its value is approximately 18-20HZ, adjust the inverter knob on the right side of the console so that it is turned clockwise, and then turn the inverter knob on the left side of the console counterclockwise. The value is altered to be somewhere in the range of 2.45HZ to 2.5HZ. Make the necessary adjustments to the light control on the frame of the conveyor so that it corresponds to the correct dimensions of the electric blanket.
4. Open the door to the cabinet that is located under the operating table. There are two switches: one for single-phase operation and one for three-phase operation. When either switch is activated, the cloth cutting machine will begin to operate.
5. It is important to carefully observe the running track of the blanket material in order to guarantee that the pattern point of the blanket is aligned in a manner that is parallel to both the cloth pressing roller and the cutting knife groove. Turn the manual switch to the motor position as rapidly as possible when the pattern point reaches the left cutting edge of the cloth cutting groove. The automatic operation of the machine that cuts cloth is initiated.
6. The operator has to constantly make sure to examine the size of the cut blanket as well as the location of the blanket while it is being cut.
Keeping your fabric cutting machine in good working order requires the following:
1. Once a week, ensure that the machine case is properly grounded by performing this check.
2. On a daily basis, check to see whether the blade used to cut fabric is sharp, and if it isn't, use a grinding stone to sharpen it.
3. Conduct a daily leak test on the air duct system.
4. Perform a monthly inspection of the electrical circuit to ensure that the insulation is in excellent condition.
5. Every six months, the lubricating oil in the reducer has to be changed up with new oil.
6. It is recommended that the grease be changed after the motor has been in operation for a year.
7. The chain should be maintained properly lubricated and tensioned at the appropriate times; the transmission gear and the worm gear should each be greased once each week.
8. When storing the device for an extended period of time, be sure that it is protected from moisture and rodents.
9. The task should remove the dirt that has been adhered to the pressure roller in a timely manner so that it does not become more difficult to clean for an extended period of time.
10. When you leave work each day, take the time to clean up thoroughly so that the machinery can continue to function properly.
In the event that you are interested in purchasing a fabric cutting machine and if such a machine is required in your firm. You may also visit the official website of Suntech, which can be found at https://www.suntech-machine.com/. Because we have such a wide selection of cloth cutting machines, we’re certain that we have at least one model that will satisfy your needs. If you have any queries regarding this fabric cutting machine, please do not hesitate to get in touch with us for any further questions that you may have.