Suntech warp beam is suitable for spun and filament yarn. Benninger, Karl mayer, Hakoba, West Point, Suker and other high speed sectional and conventional warping machines.
Warping is the process of winding a certain number of warp yarns in parallel on the warp beam or weaving shaft according to the specified length and width. Warp beam is used in this part. Warp yarns that have been warped are used for sizing and threading. Warping requires that the tension of each warp yarn is equal, evenly distributed on the warp beam or weaving shaft, and the arrangement of colored yarns conforms to the process regulations. The original warping is done by hand. In the Spring and Autumn and Warring States Periods of China, rake warping was used in silk production. In the Yuan Dynasty "Ziren's Legacy System", the method of warping by raking was recorded.
A portion of the total number of warp yarns required for a full width fabric is formed into a strip as required, and then it is wound on the warping drum. Then then yarn will be winded on the warp beam. When a strip is wound to the specified length, cut and thread the strands. The other strip is then wound in parallel next to the previous strip. In this way, the strips are wound one by one until the specified number of strips are wound. In order to form well, the warp yarns of each layer should make a small lateral movement as the drum rotates, so that the cross-section of the strip is parallelogram. Finally, the full-width warp yarns on the warping drum are wound onto the weaving bobbins with the rewinding mechanism. That’ s the final part on warp beam. The feature of the slit warping method is that it can be directly made into a weaving shaft. When it is used for warping of multi-colored or different twisted warp yarns, it is more convenient to arrange the colored warps. Widely used in small batch, multi-variety yarn-dyed weaving, wool weaving, silk weaving and other production. Warp beam is widely used.
First, part of the warp yarns required for the full width of the fabric is wound on the narrow-width small warp beam, and then several narrow-width small warp beams are simultaneously unwound into a wide-width warp beam. In order to weave fabrics arranged in a symmetrical pattern, the turning of each narrow small warp beam can be arranged at intervals of clockwise and counterclockwise. If a number of narrow and small warp beams are threaded on the shaft tube in sequence, a weaving shaft for warp knitting machines and knitting machines can be formed.
Warp beam: firstly, part of the total number of warp yarns required by the full-width fabric is wound into several warp beams, and then several warp beams are combined through a sizing machine or combined with a parallel beam machine and then wound on the beam. On the weaving shaft to meet the requirements of the total number of warps. Shaft warping is characterized by fast warping speed and high productivity, which is suitable for mass production and is often used in cotton weaving.
Since we have introduced lots of information about our warp beam, I trust that you must be interested about our warp beam. If you want to know more information about the warp beam, please view our Suntech’ s official website: https://www.suntech-machine.com/. There are various types of warp beam for you to choose. We are looking forward to hear from you if you want to order our warp beam. We also get fabric strip cutting machine, so you can take a look at this machine.